Fire roundup

Posted on Categories Uncategorized

Santa Anita Fire, Sierra Madre, California
This fire appears to mostly wrapped up. All evacuated areas, including the Chantry Flats area, have been re-opened without restrictions. They are calling it 93% contained.

Apache Fire, San Bernardino NF, California
This 700 acre fire in the San Jacinto Wilderness is visible from many areas, including Palm Springs. Aviation operations yesterday were hampered by very strong winds and a low ceiling caused by a marine layer. Some crews are hiking 10 miles to get to the fire, which is 5% contained. It is burning around patches of snow and has started to back down the massive slope thousands of feet above Palm Springs.

X Fire, Kaibab NF, Arizona
The winds yesterday were much weaker than the 40 MPH gusts predicted and the firefighters have stopped the spread for now at 2,030 acres. They canceled the incoming Type 2 Incident management team.

Trigo Fire, Cibola NF, 25 miles southeast of Albuquerque, New Mexico
This 2-week old fire came to life again yesterday and pushed by 30 MPH winds with gusts up to 50 MPH, grew substantially, causing more evacuations. Today’s weather should be similar, with winds of 34 and gusts to 48; the relative humidity will be 9%. .

Previously the fire was 4,800 acres, but it more than doubled in size yesterday with the current acreage at 11,368. The map below shows that the fire has now burned outside the national forest. Evacuations are taking place in in the Torreon and Tajique areas, affecting 400-500 residents.

The New Mexico Incident Management Team was released on April 29, and a Type 3 IMT (Gesser) assumed command at 0600. Yesterday they ordered a Type 1 IMT.

The map below, updated last night, shows in red the heat detected by satellites within the last 24 hours. The yellow area is the fire perimeter as reported today on GEOMAC. Click on it to see a larger version.

The map below shows the fire perimeter as reported today on GEOMAC.

Typos, let us know HERE, and specify which article. Please read the commenting rules before you post a comment.